Verdeler Login
 

Actual-Laser bvba - Engraving solutions

Worldwide ShippingCall us !
+32 (0)50 54 84 50
cartfacebook icongoogle plus iconyoutube icon
  • General information
  • Installation manuals
  • Installing mailboxes with 'Bobi Round'

Installing mailboxes with 'Bobi Round' supports

The support is installed over the mailbox. The instruction manual and installation materials are included in the packaging. To install you need: a drill of 6 mm made of hardened steel, measuring tapes and a spade to dig the hole. The hole is filled with concrete for a safe and secure installation.

There are 2 pre-punched holes on both sides of the mailbox.

Use a drill of 6mm made from hardened steel.

... drill the hole at low speed (max 500 rpm).

Place the mailbox in the 'BOBI round' support ...

... and secure the mailbox from the inside with the including bolts.

Dig a hole of approximately 40 cm x 40 cm (width x depth)

Place the mailbox in the hole and check if it is installed vertically using a spirit level.

Verify the correct height ...

and fill the hole with concrete.

bobi brievenbus gratis gravure klep

Actual-Laser engraves your name and house number in your BOBI mailbox for FREE !

'BOBI Round' supports fit all of our BOBI mailbox models.

Please make note of your key code (so you can reorder keys when they are lost).

 Copyright © 2014 - Actual-Laser bvba        -        Industriepark Noord 18, 8730 Beernem, Belgium        -                -        terms and conditions       -       sitemap